Lining Materials - High Build Polyurethane

MARK

Fast-Line PlusTM is an innovative, fast-setting spray-applied resin for the in-situ lining of drinking water mains.

Fast-Line PlusTM has existing National governmental approvals for use in drinking water mains in the UK, France and the USA.
The product can be applied as either a low-build (1mm thick) or a high build (3-5mm thick) lining in a single pass, using conventional
spray lining equipment for fast setting resins, in lengths of up to 650’ (200 metres). Pipe diameters from 3” bore and upwards can be treated with Fast-Line PlusTM. The result is a durable, hard, corrosion resistant barrier layer over the whole of the pipe bore.

Fast-Line PlusTM can be used to resolve water quality and internal corrosion problems in distribution and trunk mains when applied as a low-build lining, and can additionally help eliminate and prevent mains leakage when applied as a high build lining.

 

Benefits

  

Approvals

  • Lining complete and customer return to service within the working day
  • Low- and high-build lining application with the same resin
  • Ability to span corrosion holes and joint gaps
  • Excellent adhesion and no shrinkage
  • Enhances pipeline carrying capacity and assists in pressure reduction schemes
  • Bisphenol A-free formulation
USA
Approved by NSF International to NSF/ANSI 61 and all applicable requirements

UK
Approved by the Secretary of State under Regulation 31 of the Water Supply (Water Quality) Regulations 2000 for use in public water supplies.

France
Approved to the requirements of Ministère de la Santé
Regulations dated 29 May 1997 including modification
Documents DGS/VS4 No99/217 dated 12 April 1999 and DGS/VS4 No 2000/232 dated 27 April 2000

 

Mechanical Properties

TEST TEST METHOD Fast-Line Plus Unit
Tensile strength        
BS EN ISO 527 40.6 (5,887) MPa (psi)
Tensile strain at break       BS 2782:1005 3.83 %
Tensile modulus           3071 (445,295) MPa (psi)
Flexural strength            BS EN ISO 178 65.9 (9,555) MPa (psi)
Flexural strain       BS EN ISO 178 4.4 %
Flexural Modulus         BS EN ISO 178 2,838 (411,510) MPa (psi)
Adhesion         ASTM D4541 26 (3,770) MPa (psi)
Shrinkage      
Nil

 

 

More in this category: « Prev